Product features
BAMZ® Work manual
STEP1. Prepare the substrate
Polish the paint until there are no scratches, then wash and dry the car. For new cars, this step can be omitted.
STEP2. Cleaning
Apply PG86 degreaser to the car roof, hood, sides, and rear cover. Then clean and dry the car.
STEP3. Installation 1
Apply PG88 to the car roof, hood, sides, and rear cover. Wait for 5 minutes. Then polish with nano towels.
STEP4. Installation 2
Apply PG88 to the car roof, hood, sides, and rear cover. Wait for 5 minutes. Then polish with nano towels.
STEP5. Polishing
Apply PG88 to the car roof, hood, sides, and rear cover. Wait for 5 minutes. Then polish with nano towels.
STEP6. Inspecting
Fully inspect the car paint with a photometer.
TAKMee® Work manual
STEP1. Interior cleaning
Thoroughly clean the car interior, and remove decorations.
STEP2. Parts protection
Protect the instrument, central control, audio, and other LCD screens.
STEP3. Application 1
Use an air compressor to apply the product in the car.
STEP4. Application 2
Wait for the solvent to dry, then apply again to make sure all the parts and corners are covered.
STEP5. Finish
Open windows if possible after application to ensure air circulation in the car.